Debug Igmp - Allied Telesis AT-IX5-28GPX Manual

IGMP IGMP S C
AND NOOPING OMMANDS

DEBUG IGMP

debug igmp
Overview Use this command to enable debugging of either all IGMP or a specific component
of IGMP.
Use the no variant of this command to disable all IGMP debugging, or debugging
of a specific component of IGMP.
Syntax
debug igmp {all|decode|encode|events|fsm|tib}
no debug igmp {all|decode|encode|events|fsm|tib}
Modes Privileged Exec and Global Configuration
Usage This command applies to interfaces configured for IGMP, IGMP Snooping, or IGMP
Proxy.
Example
awplus#
awplus(config)#
Related show debugging igmp
Commands
undebug igmp
738 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
Enable or disable all debug options for IGMP
all
Debug of IGMP packets that have been received
decode
Debug of IGMP packets that have been sent
encode
Debug IGMP events
events
Debug IGMP Finite State Machine (FSM)
fsm
Debug IGMP Tree Information Base (TIB)
tib
configure terminal
debug igmp all
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
C613-50057-01 REV A