Access-List Hardware (Named) - Allied Telesis AT-IX5-28GPX Manual

IP 4 H A C
V ARDWARE CCESS ONTROL
- (
ACCESS LIST HARDWARE NAMED

access-list hardware (named)

Overview This command creates a named hardware access-list that can be applied to a
switch port interface. ACL filters for a named hardware ACL are created in the IPv4
Hardware ACL Configuration mode.
The no variant of this command removes the specified named hardware ACL.
Syntax
access-list hardware <hardware-access-list-name>
no access-list hardware <hardware-access-list-name>
Mode Global Configuration
Default Any traffic on an interface controlled by a hardware ACL that does not explicitly
match a filter is permitted.
Usage Use this command to name a hardware ACL and enter the IPv4 Hardware ACL
Configuration mode. If the named hardware ACL doesn't exist, it will be created
after entry. If the named hardware ACL does exist, then you can enter IPv4
Hardware ACL Configuration mode for that existing ACL.
Entering this command with the hardware ACL name moves you to the
(config-ip- hw-acl) prompt for the IPv4 Hardware ACL Configuration mode
so you can enter ACL filters with sequence numbers. From this prompt, configure
the filters for the ACL. See the
complete examples of configured sequenced numbered ACLs.
NOTE
Examples To create the hardware access-list named ACL-1 and enter the IPv4 Hardware ACL
Configuration mode to specify the ACL filter entry, use the commands:
awplus#
awplus(config)#
awplus(config-ip-hw-acl)#
To remove the hardware access-list named ACL-1, use the commands:
awplus#
awplus(config)#
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
L (ACL) C
IST OMMANDS
)
Parameter
<hardware-access-
list-name>
: Hardware ACLs will permit access unless explicitly denied by an ACL action.
configure terminal
access-list hardware ACL-1
configure terminal
no access-list hardware ACL-1
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Description
Specify the hardware ACL name to then define ACL filters
for in the subsequent IPv4 Hardware ACL Configuration
mode.
ACL Feature Overview and Configuration Guide for
837