Reboot - Allied Telesis AT-IX5-28GPX Manual

S C M
YSTEM ONFIGURATION AND

REBOOT

reboot
Overview This command halts the device and performs a cold restart (also known as reload).
It displays a confirmation request before restarting.
You can reboot a stand-alone device, a stack, or a specified stack member.
Syntax
reboot <stack-ID>
reload <stack-ID>
reboot
reload
Mode Privileged Exec
Usage The reboot and reload commands perform the same action.
When restarting the whole stack, you can either use this reboot command to
reboot all stack members immediately, or to minimize downtime, reboot the stack
members in a rolling sequence by using the
Examples To restart the device, use the command:
To restart the stand-alone device, use the command:
awplus#
reboot system? (y/n):
To restart all devices in the stack, use the command:
awplus#
Are you sure you want to reboot the whole
stack? (y/n):
To restart stack member 2, use the command:
awplus#
reboot stack-member 2 system? (y/n):
If the specified stack member ID does not exist in the current stack, the command
is rejected.
Related reboot rolling
Commands
reload rolling
218 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C
ONITORING OMMANDS
Parameter Description
Stack member number, from 1 to 8.
<stack-ID>
reboot
reboot
y
reboot stack-member 2
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
reboot rolling
y
y
command.
C613-50057-01 REV A