Show File Systems - Allied Telesis AT-IX5-28GPX Manual

F M C
ILE ANAGEMENT OMMANDS

SHOW FILE SYSTEMS

show file systems
Overview This command lists the filesystems and their utilization information where
appropriate.
If this command is entered on the stack master, it will list the filesystems for all the
stack members. A stack member heading is displayed to distinguish the different
lists shown for each stack member.
Syntax
show file systems
Mode Privileged Exec
Examples To display the filesystems for either a standalone device, or a complete stack, use
the command:
awplus#
Output Figure 3-8:
awplus#show file systems
Size(b) Free(b)
-------------------------------------------------------------------
63.0M 29.4M
- -
10.0M 9.9M
499.0K 404.0K
- -
- -
- -
- -
- -
- -
Table 3-2: Parameters in the output of the show file systems command
154 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
show file systems
Example output from the show file systems command
Type Flags Prefixes
flash rw flash:
system rw system:
debug rw debug:
nvs rw nvs:
usbstick rw usb:
tftp rw tftp:
scp rw scp:
sftp ro sftp:
http ro http:
rsync rw rsync:
Parameter Description
The total memory available to this filesystem. The units are given
Size (B)
after the value and are M for Megabytes or k for kilobytes.
Available
The total memory free within this filesystem. The units are given
Free (B)
after the value and are M for Megabytes or k for kilobytes.
The memory type used for this filesystem; one of:
Type
flash
system
nvs
usbstick
tftp
scp
sftp
http.
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
S/D/V Lcl/Ntwk Avail
static local
virtual local
static local
static local
dynamic local
- network
- network
- network
- network
- network
Y
-
Y
Y
N
-
-
-
-
-
C613-50057-01 REV A