Auth Critical - Allied Telesis AT-IX5-28GPX Manual

A C
UTHENTICATION OMMANDS

AUTH CRITICAL

auth critical
Overview This command enables the critical port feature on the interface. When the critical
port feature is enabled on an interface, and all the RADIUS servers are unavailable,
then the interface becomes authorized.
The no variant of this command disables critical port feature on the interface.
Syntax
auth critical
no auth critical
Default The critical port of port authentication is disabled.
Mode Interface Configuration for a static channel, a dynamic (LACP) channel group, or a
switch port.
Examples To enable the critical port feature on interface port1.0.2, use the following
commands:
awplus#
awplus(config)#
awplus(config-if)#
To disable the critical port feature on interface port1.0.2, use the following
commands:
awplus#
awplus(config)#
awplus(config-if)#
Validation show auth-web-server
Commands
show dot1x
show dot1x interface
show running-config
1042 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
configure terminal
interface port1.0.2
auth critical
configure terminal
interface port1.0.2
no auth critical
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
C613-50057-01 REV A