Ip Igmp - Allied Telesis AT-IX5-28GPX Manual

IGMP IGMP S C
AND NOOPING OMMANDS

IP IGMP

ip igmp
Overview Use this command to enable IGMP on an interface. The command configures the
device as an IGMP querier.
Use the no variant of this command to return all IGMP related configuration to the
default on this interface.
Syntax
ip igmp
no ip igmp
Default Disabled
Mode Interface Configuration for a VLAN interface.
Usage This command can only be configured on VLAN interfaces, and will have no effect
on IGMP Proxy or IGMP Snooping configuration.
NOTE
An IP address must be assigned to the VLAN first, before this command will work.
Example
awplus#
awplus(config)#
awplus(config-if)#
Validation show ip igmp interface
Commands
show running-config
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
:
configure terminal
interface vlan2
ip igmp
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
739