Show System Environment - Allied Telesis AT-IX5-28GPX Manual

S C M
YSTEM ONFIGURATION AND

SHOW SYSTEM ENVIRONMENT

show system environment
Overview This command displays the current environmental status of your device and any
attached PSU, XEM, or other expansion option. The environmental status covers
information about temperatures, fans, and voltage.
For information on filtering and saving command output, see "Controlling "show"
Command Output" in the
and Configuration
Syntax
show system environment
Mode User Exec and Privileged Exec
Usage For a stacked configuration, if this command is entered on the stack master, it will
display the information for all the stack members. A stack member heading will be
displayed to distinguish the different information for every stack member.
Example To display the system's environmental status, use the command:
awplus#
Output Figure 5-18: Example output from the show system environment command
Stack Environment Monitoring Status
Stack member 1:
Overall Status: Normal
Resource ID: 1 Name: x510-28GTX
ID Sensor (Units)
1 Fan: Fan 1 (Rpm)
2 Voltage: 1.8V (Volts)
3 Voltage: 1.0V (Volts)
4 Voltage: 3.3V (Volts)
5 Voltage: 5.0V (Volts)
6 Voltage: 1.2V (Volts)
7 Temp: CPU (Degrees C)
Related show system
Commands
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C
ONITORING OMMANDS
Guide.
show system environment
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
"Getting Started with AlliedWare Plus" Feature Overview
Reading Low Limit High Limit Status
4344 3000
1.804 1.617
0.995 0.896
3.291 2.960
5.066 4.477
1.187 1.072
50 -10
- Ok
1.978 Ok
1.099 Ok
3.613 Ok
5.498 Ok
1.318 Ok
90 Ok
249