Chapter 15: Gvrp Commands; Introduction - Allied Telesis AT-IX5-28GPX Manual

15

Introduction

Overview With GVRP enabled the switch can exchange VLAN configuration information with
other GVRP enabled switches. VLANs can be dynamically created and managed
through trunk ports.
•
•
•
This chapter provides an alphabetical reference for commands used to configure
GVRP. For information about GVRP, including configuration, see the
Overview and Configuration
Command List •
•
•
•
•
•
•
•
•
•
•
587 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
GVRP Commands
There is limit of 400 VLANs supported by the AlliedWare Plus GVRP
implementation. VLANs may be numbered 1-4094, but a limit of 400 of these
VLANs are supported.
MSTP is not supported by the AlliedWare Plus GVRP implementation. GVRP
and MSTP are mutually exclusive. STP and RSTP are supported by GVRP.
VCStack is not supported by the current AlliedWare Plus GVRP
implementation.
"clear gvrp statistics" on page 589
"debug gvrp" on page 590
"gvrp (interface)" on page 592
"gvrp dynamic-vlan-creation" on page 593
"gvrp enable (global)" on page 594
"gvrp registration" on page 595
"gvrp timer" on page 596
"show debugging gvrp" on page 598
"show gvrp configuration" on page 599
"show gvrp machine" on page 600
"show gvrp statistics" on page 601
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Guide.
GVRP Feature
C613-50057-01 REV A