Show System Mac - Allied Telesis AT-IX5-28GPX Manual

S C M
YSTEM ONFIGURATION AND

SHOW SYSTEM MAC

show system mac
Overview This command displays the physical MAC address available on a standalone
switch, or a stack. This command also shows the virtual MAC address for a stack if
the stack virtual MAC address feature is enabled with the
stack enable
Syntax
show system mac
Mode User Exec and Privileged Exec
Usage This command also displays the virtual MAC address, if the VCStack virtual MAC
address feature is enabled with the
For more information, see the
Example To display the physical MAC address enter the following command:
awplus#
Output Figure 5-20: Example output from the show system mac command
Output Figure 5-21: Example output showing how to use the stack virtual-mac
Related stack virtual-mac
Commands
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C
ONITORING OMMANDS
command.
show system mac
awplus#show system mac
eccd.6d9d.4eed
command and the show system mac command
awplus#configure terminal
Enter configuration commands, one per line.
awplus(config)#stack virtual-mac
% Please check that the new MAC 0000.cd37.0065 is unique within
the network.
% Save the config and restart the system for this change to take
effect.
Member1#copy run start
Building configuration...
[OK]
Member1#reload
reboot system? (y/n): y
... Rebooting at user request ...
Loading default configuration ....
awplus login: manager
Password:
awplus>show system mac
eccd.6d9d.4eed
Virtual MAC Address 0000.cd37.0065
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
stack virtual-mac
VCStack Feature Overview and Configuration
stack virtual-mac or the
command.
Guide.
End with CNTL/Z.
251