Auth Max-Supplicant - Allied Telesis AT-IX5-28GPX Manual

A C
UTHENTICATION OMMANDS
-
AUTH MAX SUPPLICANT

auth max-supplicant

Overview This command sets the maximum number of supplicants (client devices) on the
interface that can be authenticated. After this value is exceeded supplicants are
not authenticated.
The no variant of this command resets the maximum supplicant number to the
default (1024).
Syntax
auth max-supplicant <2-1024>
no auth max-supplicant
Default The max supplicant of port authentication is 1024.
Mode Interface Configuration for a static channel, a dynamic (LACP) channel group, or a
switch port.
Examples To set the maximum number of supplicants to 10 on interface port1.0.2, use
the following commands:
awplus#
awplus(config)#
awplus(config-if)#
To reset the maximum number of supplicant to default on interface port1.0.2,
use the following commands:
awplus#
awplus(config)#
awplus(config-if)#
Validation show dot1x
Commands
show dot1x interface
show running-config
1052 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
Limit number.
<2-1024>
configure terminal
interface port1.0.2
configure terminal
interface port1.0.2
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
auth max-supplicant 10
no auth max-supplicant
C613-50057-01 REV A