Ipv6 Access-List (Named) - Allied Telesis AT-IX5-28GPX Manual

High availability, high power video surveillance poe switch
Hide thumbs Also See for AT-IX5-28GPX:
Table of Contents

Advertisement

IP
6 H
A
C
V
ARDWARE
CCESS
ONTROL
6
-
(
)
IPV
ACCESS
LIST
NAMED

ipv6 access-list (named)

Overview
Use this command to either create a new IPv6 hardware access-list, or to select an
existing IPv6 hardware access-list in order to apply a filter entry to it.
Use the no variant of this command to delete an existing IPv6 hardware access-list.
NOTE
it is assigned to.
Syntax
ipv6 access-list <ipv6-access-list-name>
no ipv6 access-list <ipv6-access-list-name>
Mode
Global Configuration
Default
Any traffic on an interface controlled by a hardware ACL that does not explicitly
match a filter is permitted.
Usage
Use IPv6 hardware named access-lists to control the transmission of IPv6 packets
on an interface, and restrict the content of routing updates. The switch stops
checking the IPv6 hardware named access-list when a match is encountered.
For backwards compatibility you can either create IPv6 hardware named
access-lists from within this command, or you can enter ipv6
access-listfollowed by only the IPv6 hardware named access-list name. This
latter (and preferred) method moves you to the (config-ipv6-hw-acl)
prompt for the selected IPv6 hardware named access-list number, and from here
you can configure the filters for this selected IPv6 hardware named access-list.
NOTE
Examples
To create an IPv6 access-list named my-ipv6-acl, use the commands:
awplus#
awplus(config)#
awplus(config-ipv6-hw-acl)#
To delete the IPv6 access-list named my-ipv6-acl, use the commands:
awplus#
awplus(config)#
Validation
show ipv6 access-list (IPv6 Hardware ACLs)
Commands
906
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
L
(ACL) C
IST
OMMANDS
: Before you can delete an access-list, you must first remove it from any interface
Parameter
<ipv6-access-list-name>
: Hardware ACLs will permit access unless explicitly denied by an ACL action.
configure terminal
ipv6 access-list my-ipv6-acl
configure terminal
no ipv6 access-list my-ipv6-acl
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Description
Specify an IPv6 access-list name.
C613-50057-01 REV A

Advertisement

Table of Contents
loading

Table of Contents