Ip Multicast-Routing - Allied Telesis AT-IX5-28GPX Manual

M C
ULTICAST OMMANDS
-
IP MULTICAST ROUTING

ip multicast-routing

Overview Use this command to turn on/off IPv4 multicast routing on the router; when turned
off the device does not perform multicast functions.
Use the no variant of this command to disable IPv4 multicast routing after
enabling it. Note the default stated below.
Syntax
ip multicast-routing
no ip multicast-routing
Default By default, IPv4 multicast routing is off.
Mode Global Configuration
Usage When the no variant of this command is used, the Multicast Routing Information
Base (MRIB) cleans up Multicast Routing Tables (MRT), stops IGMP operation, and
stops relaying multicast forwarder events to multicast protocols.
When multicast routing is enabled, the MRIB starts processing any MRT
addition/deletion requests, and any multicast forwarding events.
You must enable multicast routing before issuing other multicast commands.
Example
awplus#
awplus(config)#
Validation show running-config
Commands
720 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
configure terminal
ip multicast-routing
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
C613-50057-01 REV A