Show Cpu History - Allied Telesis AT-IX5-28GPX Manual

S C M
YSTEM ONFIGURATION AND

SHOW CPU HISTORY

show cpu history
Overview This command prints a graph showing the historical CPU utilization.
For information on filtering and saving command output, see "Controlling "show"
Command Output" in the
and Configuration
Syntax
show [<stack-ID>] cpu history
Mode User Exec and Privileged Exec
Usage This command's output displays three graphs of the percentage CPU utilization:
•
•
•
If this command is entered on the stack master, it will print graphs for all the stack
members. A stack member heading will be displayed to distinguish the different
graphs for every stack member.
Examples To display a graph showing the historical CPU utilization of the device, use the
command:
awplus#
To display the CPU utilization history graph for stack member 2, use the command:
awplus#
where 2 is the node id of the stack member.
226 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C
ONITORING OMMANDS
Guide.
Parameter Description
Stack member number, from 1 to 8.
<stack-ID>
per second for the last minute, then
per minute for the last hour, then
per 30 minutes for the last 30 hours.
show cpu history
show 2 cpu history
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
"Getting Started with AlliedWare Plus" Feature Overview
C613-50057-01 REV A