Switchport Mode Private-Vlan - Allied Telesis AT-IX5-28GPX Manual

VLAN C
OMMANDS
-
SWITCHPORT MODE PRIVATE VLAN

switchport mode private-vlan

Overview Use this command to make a Layer 2 port a private VLAN host port or a
promiscuous port.
Use the no variant of this command to remove the configuration.
Syntax
switchport mode private-vlan {host|promiscuous}
no switchport mode private-vlan {host|promiscuous}
Mode Interface Configuration
Examples
awplus#
awplus(config)#
awplus(config-if)#
awplus(config)#
awplus(config-if)#
awplus(config)#
awplus(config-if)#
Related switchport private-vlan mapping
Commands
432 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
This port type can communicate with all other host ports assigned to
host
the same community VLAN, but it cannot communicate with the
ports in the same isolated VLAN. All communications outside of this
VLAN must pass through a promiscuous port in the associated
primary VLAN.
A promiscuous port can communicate with all interfaces, including
promiscuous
the community and isolated ports within a private VLAN.
configure terminal
interface port1.0.2
interface port1.0.3
interface port1.0.4
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
switchport mode private-vlan host
switchport mode private-vlan promiscuous
no switchport mode private-vlan promiscuous
C613-50057-01 REV A