Ip Igmp Query-Max-Response-Time - Allied Telesis AT-IX5-28GPX Manual

High availability, high power video surveillance poe switch
Hide thumbs Also See for AT-IX5-28GPX:
Table of Contents

Advertisement

IGMP
IGMP S
C
AND
NOOPING
OMMANDS
-
-
-
IP IGMP QUERY
MAX
RESPONSE
TIME

ip igmp query-max-response-time

Overview
Use this command to configure the maximum response time advertised in IGMP
Queries.
Use the no variant of this command to restore the default.
NOTE
The IGMP query maximum response time must be less than the IGMP query interval.
Syntax
ip igmp query-max-response-time <response-time>
no ip igmp query-max-response-time
Default
The default IGMP query maximum response time is 10 seconds.
Mode
Interface Configuration for a VLAN interface.
Usage
This command applies to interfaces configured for IGMP. Note that the IGMP query
interval is automatically set to a greater value than the IGMP query maximum
response time.
For example, if you set the IGMP query interval to 3 seconds using the
query-interval
seconds, then the IGMP query maximum response time will be automatically
reconfigured to be 2 seconds, so it is less than the IGMP query interval time.
To get the network to converge faster, use the ip igmp
query-max-response-time command and set a low response time value, such as
one or two seconds, so that the clients will respond immediately with a report as a
response to the IGMP Queries.
Examples
The following example configures a maximum response time of 8 seconds for
VLAN interface vlan2:
awplus#
awplus(config)#
awplus(config-if)#
The following example restores the default maximum response time of 10
seconds for VLAN interface vlan2:
awplus#
awplus(config)#
awplus(config-if)#
C613-50057-01 REV A
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
:
Parameter
<response-time>
command, and the current IGMP query interval is less than 3
configure terminal
interface vlan2
configure terminal
interface vlan2
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Description
Response time value in seconds, in the range <1-3180>.
ip igmp query-max-response-time 8
no ip igmp query-max-response-time
ip igmp
753

Advertisement

Table of Contents
loading

Table of Contents