Max-Fib-Routes - Allied Telesis AT-IX5-28GPX Manual

High availability, high power video surveillance poe switch
Hide thumbs Also See for AT-IX5-28GPX:
Table of Contents

Advertisement

S
C
M
YSTEM
ONFIGURATION AND
-
-
MAX
FIB
ROUTES

max-fib-routes

Overview
This command enables you to control the maximum number of FIB routes
configured. It operates by providing parameters that enable you to configure
preset maximums and warning message thresholds. The operation of these
parameters is explained in the Parameter / Description table shown below.
NOTE
Use the no variant of this command to set the maximum number of FIB routes to
the default of 4294967294 FIB routes.
Syntax
max-fib-routes <1-4294967294> [<1-100>|warning-only]
no max-fib-routes
Default
The default number of fib routes is the maximum number of fib routes
(4294967294).
Mode
Global Configuration
Examples
To set the maximum number of dynamic routes to 2000 and warning threshold of
75%, use the following commands:
awplus#
awplus(config)#
C613-50057-01 REV A
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C
ONITORING
OMMANDS
: To set static routes, use the
Parameter
Description
This is a the maximum number of routes that can be stored in
max-fib-routes
the device's Forwarding Information dataBase. In practice, other
practical system limits would prevent this maximum being
reached.
The allowable configurable range for setting the maximum
<1-4294967294>
number of FIB-routes.
This parameter enables you to optionally apply a percentage
<1-100>
value. This percentage will be based on the maximum number
of FIB routes you have specified. This will cause a warning
message to appear when your routes reach your specified
percentage value. Routes can continue to be added until your
configured maximum value is reached.
This parameter enables you to optionally apply a warning
warning-only
message. If you set this option a warning message will appear if
your maximum configured value is reached. Routes can
continue to be added until your device reaches either the
maximum capacity value of 4294967294, or a practical system
limit.
config terminal
max-fib-routes 2000 75
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
max-static-routes
command.
215

Advertisement

Table of Contents
loading

Table of Contents