Vlan Classifier Rule Ipv4 - Allied Telesis AT-IX5-28GPX Manual

VLAN C
OMMANDS
4
VLAN CLASSIFIER RULE IPV

vlan classifier rule ipv4

Overview Use this command to create an IPv4 subnet-based VLAN classifier rule and map it
to a specific VLAN. Use the no variant of this command to delete the VLAN classifier
rule.
Syntax
vlan classifier rule <1-256> ipv4 <ip-addr/prefix-length> vlan
<1-4094>
no vlan classifier rule <1-256>
Mode Global Configuration
Usage If the source IP address matches the IP subnet specified in the VLAN classifier rule,
the received packets are mapped to the specified VLAN.
Example
awplus#
terminal
awplus(config)#
classifier rule 3 ipv4 3.3.3.3/8 vlan 5
Related show vlan classifier rule
Commands
vlan classifier activate
vlan classifier rule proto
454 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter
<1-256>
<ip-addr/prefix-length>
<1-4094>
configure
vlan
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Description
Specify the VLAN Classifier Rule identifier.
Specify the IP address and prefix length.
Specify a VLAN ID to which an untagged packet is
mapped in the range <1-4094>.
C613-50057-01 REV A