Ip Igmp Robustness-Variable - Allied Telesis AT-IX5-28GPX Manual

IGMP IGMP S C
AND NOOPING OMMANDS
-
IP IGMP ROBUSTNESS VARIABLE

ip igmp robustness-variable

Overview Use this command to change the robustness variable value on a VLAN interface.
Use the no variant of this command to return to the default on an interface.
Syntax
ip igmp robustness-variable <1-7>
no ip igmp robustness-variable
Default The default robustness variable value is 2.
Mode Interface Configuration for a VLAN interface.
Usage This command applies to interfaces configured for IGMP and IGMP Snooping.
Examples
awplus#
awplus(config)#
awplus(config-if)#
awplus#
awplus(config)#
awplus(config-if)#
Validation show ip igmp interface
Commands
show running-config
756 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
The robustness variable value.
<1-7>
configure terminal
interface vlan20
configure terminal
interface vlan20
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
ip igmp robustness-variable 3
no ip igmp robustness-variable 3
C613-50057-01 REV A