Multicast - Allied Telesis AT-IX5-28GPX Manual
High availability, high power video surveillance poe switch
Hide thumbs
Also See for AT-IX5-28GPX:
- Installation manual (129 pages) ,
- Product information (7 pages)
Table of Contents
Advertisement
M
C
ULTICAST
OMMANDS
MULTICAST
multicast
Overview
Use this command to enable a device port to route multicast packets that ingress
the port.
Use the no variant of this command to stop the device port from routing multicast
packets that ingress the port. Note that this does not affect Layer 2 forwarding of
multicast packets. If you enter no multicast on a port, multicast packets received
on that port will not be forwarded to other VLANs, but ports in the same VLANs as
the receiving port will still receive the multicast packets.
Syntax
multicast
no multicast
Default
By default, all device ports route multicast packets.
Mode
Interface Configuration
Examples
awplus#
awplus(config)#
awplus(config-if)#
awplus#
awplus(config)#
awplus(config-if)#
Validation
show running-config
Commands
726
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
configure terminal
interface port1.0.1
multicast
configure terminal
interface port1.0.1
no multicast
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
C613-50057-01 REV A
Advertisement
Table of Contents
