Show Log Permanent - Allied Telesis AT-IX5-28GPX Manual

L C
OGGING OMMANDS

SHOW LOG PERMANENT

show log permanent
Overview This command displays the contents of the permanent log.
When used within a stacked environment, this command will display the contents
of the permanent log for all the stack members, unless you specify a particular
stack member.
Syntax
show log permanent[<stack-ID>][tail [<10-250>]]
Default If the optional tail parameter is specified only the latest 10 messages in the
permanent log are displayed. A numerical value can be specified after the tail
parameter to select how many of the latest messages should be displayed.
Mode User Exec, Privileged Exec and Global Configuration
Example To display the permanent log of stack member 2, use the command:
awplus#
Output Figure 6-6:
awplus#show log permanent 2
Stack member 2:
<date> <time> <facility>.<severity> <program[<pid>]>: <message>
-------------------------------------------------------------------------
2014 Feb 25 09:10:48 daemon.crit awplus-2 HPI: HOTSWAP Pluggable 2.0.51 hotswapped
in: AT-StackXS/1.0
2014 Feb 25 09:10:48 daemon.crit awplus-2 HPI: HOTSWAP Pluggable 2.0.52 hotswapped
in: 2127931-2
2014 Feb 25 09:10:50 user.crit awplus-2 VCS[922]: Member 1 (eccd.6d7d.a50e) has
joined the stack
2014 Feb 25 09:10:52 user.crit awplus-2 VCS[922]: Member 1 (eccd.6d7d.a50e) has
become the Active Master
2014 Feb 25 09:10:52 local6.alert awplus-2 VCS[922]: stack member has booted from
non-default location, SW version auto synchronization cannot be supported.
2014 Feb 25 09:10:52 user.crit awplus-2 VCS[922]: Stack Virtual MAC is
0000.cd37.0002
2014 Feb 25 09:11:46 user.crit awplus-2 ATMF[862]: awplus-x510 has joined. 1
member in total.
Related show log
Commands
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
Stack member number, from 1 to 8.
<stack-ID>
Display only the latest log entries.
tail
Specify the number of log entries to display.
<10-250>
show log permanent 2
Example output from the show log permanent command
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
321