Arp Opportunistic-Nd - Allied Telesis AT-IX5-28GPX Manual

IP A P
DDRESSING AND ROTOCOL
-
ARP OPPORTUNISTIC ND

arp opportunistic-nd

Overview This command changes the behavior for unsolicited ARP packet forwarding on the
device.
Use this command to enable opportunistic neighbor discovery for the global ARP
cache.
Use the no variant of this command to disable opportunistic neighbor discovery
for the global ARP cache.
Syntax
arp opportunistic-nd
no arp opportunistic-nd
Default Opportunistic neighbor discovery is disabled by default.
Mode Global Configuration
Usage When opportunistic neighbor discovery is enabled, the device will reply to any
received unsolicited ARP packets (but not gratuitous ARP packets). The source
MAC address for the unsolicited ARP packet is added to the ARP cache, so the
device forwards the ARP packet. When opportunistic neighbor discovery is
disabled, the source MAC address for the ARP packet is not added to the ARP
cache, so the ARP packet is not forwarded by the device.
Examples To enable opportunistic neighbor discovery for the global ARP cache, enter:
awplus#
awplus(config)#
To disable opportunistic neighbor discovery for the global ARP cache, enter:
awplus#
awplus(config)#
Related ipv6 opportunistic-nd
Commands
show arp
Validation show running-config interface
Commands
610 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C
OMMANDS
configure terminal
arp opportunistic-nd
configure terminal
no arp opportunistic-nd
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
C613-50057-01 REV A