Log Email (Filter) - Allied Telesis AT-IX5-28GPX Manual

L C
OGGING OMMANDS
( )
LOG EMAIL FILTER

log email (filter)

Overview This command creates a filter to select messages to be sent to an email address.
Selection can be based on the priority/ severity of the message, the program that
generated the message, the logging facility used, a sub-string within the message
or a combination of some or all of these.
The no variant of this command configures the device to no longer send log
messages to a specified email address. All configuration relating to this log target
will be removed.
Syntax
log email <email-address> [level <level>] [program
<program-name>] [facility <facility>] [msgtext <text-string>]
no log email <email-address> [level <level>] [program
<program-name>] [facility <facility>] [msgtext <text-string>]
Parameter Description
The email address to send logging messages to
<email-
address>
Filter messages by severity level.
level
The minimum severity of message to send. The level can be specified as one of the following
<level>
numbers or level names, where 0 is the highest severity and 7 is the lowest severity:
0|emergencies
1|alerts
2|critical
3|errors
4|warnings
5|notices
6|informational
7|debugging
Filter messages by program. Include messages from a specified program.
program
292 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
System is unusable
Action must be taken immediately
Critical conditions
Error conditions
Warning conditions
Normal, but significant, conditions
Informational messages
Debug-level messages
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
C613-50057-01 REV A