Terminal Length - Allied Telesis AT-IX5-28GPX Manual

U A C
SER CCESS OMMANDS

TERMINAL LENGTH

terminal length
Overview Use the terminal length command to specify the number of rows of output that
the device will display before pausing, for the currently-active terminal only.
Use the terminal no length command to remove the length specified by this
command. The default length will apply unless you have changed the length for
some or all lines by using the
Syntax
terminal length <length>
terminal no length [<length>]
Mode User Exec and Privileged Exec
Examples The following example sets the number of lines to 15:
awplus#
The following example removes terminal length set previously:
awplus#
Related terminal resize
Commands
length (asyn)
114 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
<0-512> Number of rows that the device will display on the
<length>
currently-active terminal before pausing.
terminal length 15
terminal no length
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
length (asyn) command.
C613-50057-01 REV A