Show Vlan Classifier Interface Group - Allied Telesis AT-IX5-28GPX Manual

VLAN C
OMMANDS

SHOW VLAN CLASSIFIER INTERFACE GROUP

show vlan classifier interface group
Overview Use this command to display information about all interfaces configured for a
VLAN group or all the groups.
Syntax
show vlan classifier interface group [<1-16>]
Mode User Exec and Privileged Exec
Usage If a group ID is not specified, all interfaces configured for all VLAN classifier groups
are shown. If a group ID is specified, the interfaces configured for this VLAN
classifier group are shown.
Example To display information about all interfaces configured for all VLAN groups, enter
the command:
awplus#
To display information about all interfaces configured for VLAN group 1, enter the
command:
awplus#
Output Figure 11-4: Example output from the show vlan classifier interface group
Output Figure 11-5: Example output from the show vlan classifier interface group 1
Related vlan classifier group
Commands
show vlan classifier group interface
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
VLAN classifier interface group identifier
<1-16>
show vlan classifier interface group
show vlan classifier interface group 1
command
vlan classifier group 1 interface port1.0.1
vlan classifier group 1 interface port1.0.2
vlan classifier group 2 interface port1.0.3
vlan classifier group 2 interface port1.0.4
command
vlan classifier group 1 interface port1.0.1
vlan classifier group 1 interface port1.0.2
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
425