Ip Igmp Immediate-Leave - Allied Telesis AT-IX5-28GPX Manual

IGMP IGMP S C
AND NOOPING OMMANDS
-
IP IGMP IMMEDIATE LEAVE

ip igmp immediate-leave

Overview In IGMP version 2, use this command to minimize the leave latency of IGMP
memberships for specified multicast groups. The specified access list number or
name defines the multicast groups in which the immediate leave feature is
enabled.
Use the no variant of this command to disable this feature.
Syntax
ip igmp immediate-leave group-list
{<access-list-number>|<access-list-number-expanded>|<access-li
st-name>}
no ip igmp immediate-leave
Default Disabled by default.
Mode Interface Configuration for a VLAN interface.
Usage This command applies to interfaces configured for IGMP, IGMP Snooping, or IGMP
Proxy.
Example The following example shows how to enable the immediate-leave feature on the
VLAN interface vlan2 for a specific range of multicast groups:
awplus#
awplus(config)#
awplus(config-if)#
awplus(config-if)#
awplus(config)#
Related ip igmp last-member-query-interval
Commands
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter
<access-list-number>
<access-list-number-expanded>
<access-list-name>
configure terminal
interface vlan2
access-list 34 permit 225.192.20.0 0.0.0.255
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Description
Access-list number, in the range <1-99>.
Access-list number (expanded range), in
the range <1300-1999>.
Standard IP access-list name.
ip igmp immediate-leave group-list 34
exit
741