Q
S C
O
OMMANDS
SHOW MLS QOS
show mls qos
Overview
Use this command to display whether QoS is enabled or disabled on the switch.
Syntax
show mls qos
Mode
User Exec and Privileged Exec
Example
To display whether QoS is enabled or disabled, use the command:
awplus#
Output
Figure 26-3: Example output from the show mls qos command
Related
mls qos enable
Commands
984
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
show mls qos
awplus#show mls qos
Enable
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
C613-50057-01 REV A