Storm-Window - Allied Telesis AT-IX5-28GPX Manual

Q S C
O OMMANDS
-
STORM WINDOW

storm-window

Overview Sets the window size of QoS Storm Protection (QSP). This sets the time to poll the
data-rate every given milliseconds. Minimum window size is 100 ms and the
maximum size is 60 sec.
Use the no variant of this command to negate the storm-window command.
Syntax
storm-window <100-60000>
no storm-window
Default No default
Mode Policy Map Class Configuration
Usage This command should be set in conjunction with the
Examples To set the QSP window size to 5000 ms, use the following commands:
awplus#
awplus(config)#
awplus(config-pmap)#
awplus(config-pmap-c)#
To negate the QSP window size set previously, use the following commands:
awplus#
awplus(config)#
awplus(config-pmap)#
awplus(config-pmap-c)#
Related storm-action
Commands
storm-downtime
storm-protection
storm-rate
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
The window size, measured in milliseconds.
<100-60000>
configure terminal
policy-map pmap2
configure terminal
policy-map pmap2
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
class cmap2
storm-window 5000
class cmap2
no storm-window
storm-rate command.
999