Class - Allied Telesis AT-IX5-28GPX Manual

Q S C
O OMMANDS

CLASS

class
Overview Use this command to associate an existing class-map to a policy or policy-map
(traffic classification), and to enter Policy Map Class Configuration mode to
configure the class- map.
Use the no variant of this command to delete an existing class-map.
For more information on class-maps and policy-maps, see the the
Overviewand Configuration
If your class-map does not exist, you can create it by using the
command.
Syntax
class {<name>|default}
no class <name>
Mode Policy Map Configuration
Example The following example creates the policy-map pmap1(using the policy-map
command), then associates this to an already existing class-map named cmap1,
use the commands:
awplus#
awplus(config)#
awplus(config-pmap)#
awplus(config-pmap-c)#
Related class-map
Commands
policy-map
946 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
Name of the (already existing) class-map.
<name>
Specify the default class-map.
default
configure terminal
policy-map pmap1
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Guide.
class cmap1
QoS Feature
class-map
C613-50057-01 REV A