Log Host - Allied Telesis AT-IX5-28GPX Manual

L C
OGGING OMMANDS

LOG HOST

log host
Overview This command configures the device to send log messages to a remote syslog
server via UDP port 514. The IP address of the remote server must be specified. By
default no filters are defined for remote syslog servers. Filters must be defined
before messages will be sent.
Syntax
log host <ip-addr>
no log host <ip-addr>
Mode Global Configuration
Examples To configure the device to send log messages to a remote syslog server with IP
address 10.32.16.99 use the following commands:
awplus#
awplus(config)#
To stop the device from sending log messages to the remote syslog server with IP
address 10.32.16.99 use the following commands:
awplus#
awplus(config)#
Validation show log config
Commands
Related default log host
Commands
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
The IP address of a remote syslog server in dotted decimal format
<ip-addr>
A.B.C.D
configure terminal
log host 10.32.16.99
configure terminal
no log host 10.32.16.99
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
297