enable
Use this command to globally enable captive portal.
Default
disabled
Format
enable
Mode
Captive Portal Configuration mode
no enable
Use this command to globally disable captive portal.
Default
disabled
Format
no enable
Mode
Captive Portal Configuration mode
http port
Use this command to configure an additional HTTP port for captive portal to monitor. The
valid range is from 0 to 65535.
Default
80
Format
http port
Mode
Captive Portal Configuration mode
no http port
Use this command to reset the HTTP port to the default number 80.
Format
no http port
Mode
Captive Portal Configuration mode
https port
Use this command to configure an additional HTTPS port for captive portal to monitor. The
valid range is from 0 to 65535.
Default
443
Format
https port
Mode
Captive Portal Configuration mode
ProSafe Managed Switch
<0-65535>
<0-65535>
Captive Portal Commands
691