NEC Univerge SV8100 Features And Specifications Manual page 369

UNIVERGE SV8100
Conditions
When a DIL rings to a Department Group, the DIL may follow overflow programming
(Program 22-01-04 and Program 22-08-01).
If all agents are logged out and an intercom call to the Department Group is made you get a
busy signal.
Extensions in a Department Group which have Call Forwarding enabled are not included in
the call hunt. The extension to which the user is forwarded does not receive the hunted calls.
When you use the automatic Department Step calling (Program 16-01-03) it hunts only to
members with the same or lower priority.
Easily step call to an idle Department Group member if the member called is busy.
A virtual extension can be programmed to receive multiple calls which can camp-on to the
extension – no analog port is required.
An extension user can Transfer a call to a Department Group Pilot number. If unanswered,
the call recalls (depending on programming) the transferring extension after the Transfer
Recall Time (Program 24-02-04).
Voice mail uses one Department Group for voice mail.
When Program 16-01-05 is set to (1) Automatic, all telephones in the Department group Ring
for ICM calls & DID calls Directed to the Department Group Pilot Number only.
The Overflow feature is only supported for DID calls pointed directly to the Pilot Number.
POTS lines and transferred DIDs ignore the Overflow settings.
When a Department Group is assigned as the VM Department Group in Program 45-01-01 it
will only work as priority mode no matter what Program 16-01-02 is set to for that
Department Group.
Program 16-01-05 (Extension Group All Ring Mode Operation) does not work to a
Secondary Department Group.
Default Setting
Disabled
SV8100 Features and Specifications Manual
Issue 1.0
2 - 345