NEC Univerge SV8100 Features And Specifications Manual page 351

UNIVERGE SV8100
Program
Program Name
Number
20-08-02 Class of Service Options
(Outgoing Call Service) – Trunk
Outgoing Calls
20-08-03 Class of Service Options
(Outgoing Call Service) – System
Speed Dialing
20-08-04 Class of Service Options
(Outgoing Call Service) – Group
Speed Dialing
20-08-06 Class of Service Options
(Outgoing Call Service) – Toll
Restriction Override
20-08-08 Class of Service Options
(Outgoing Call Service) – Toll
Restriction Dial Block
20-08-10 Class of Service Options
(Outgoing Call Service) – Signal/
Voice Call
20-08-11 Class of Service Options
(Outgoing Call Service) – Protect
for the Call Mode Switching from
Caller
20-08-12 Class of Service Options
(Outgoing Call Service) –
Department Group Step Calling
20-08-13 Class of Service Options
(Outgoing Call Service) – ISDN
CLIP
20-08-14 Class of Service Options
(Outgoing Call Service) – Call
Address Information
SV8100 Features and Specifications Manual
Description/Comments
Turns Off (0) or On (1) outgoing
trunk calling for the extension.
Turns Off (0) or On (1) an
extension user ability to make
outbound calls using system speed
dial numbers.
Turns Off (0) or On (1) an extension
user ability to make outbound calls
using group speed dial numbers.
Turns Off or On Toll Restricting
Override (Service Code 663).
Turns Off or On an extension user
ability to use Dial Block.
Turns Off or On an extension
allowing it to force Handsfree
Answerback or Forced Intercom
Ringing for outgoing Intercom calls.
When an extension is set to ring
mode for ICM calls, enabling this
option prevents callers from
changing the call to voice announce
mode.
Turns Off or On an extension user
ability to use Department Group
Step Calling.
Determine if the ISDN calling line
identity presentation and screening
indicators are to be allowed.
Use to define the Class of Service
(COS) for call address information.
Assigned Data
1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
Issue 1.0
Level
2 3
2 - 327