BFD Commands
vrrp bfd-state
Enables or disables VRRP with the BFD protocol.
vrrp bfd-state {enable | disable}
Syntax Definitions
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
BFD support for VRRP is done only for tracking policy configuration for a remote address.
•
The BFD status for VRRP must be enabled before VRRP can interact with BFD.
Examples
-> vrrp bfd-state enable
-> vrrp bfd-state disable
Release History
Release 7.1.1; command was introduced.
Related Commands
vrrp track address bfd-state
MIB Objects
alaVrrpConfig
alaVrrpBfdStatus
OmniSwitch CLI Reference Guide
Enables BFD for VRRP.
Disables BFD for VRRP.
default
disable
Enables or disable BFD for a specific tracking policy.
March 2011
vrrp bfd-state
page 14-23