IPv6 Commands
ipv6 rip admin-state
Enables or disables RIPng on the switch.
ipv6 rip admin-state {enable | disable}
Syntax Definitions
N/A
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 10K
Usage Guidelines
RIPng must be loaded on the switch
Examples
-> ipv6 rip admin-state enable
Release History
Release 7.1.1; command was introduced.
Related Commands
ipv6 load rip
show ipv6 rip
MIB Objects
alaProtocolripng
alaRipngProtoStatus
OmniSwitch CLI Reference Guide
default
disable
(ipv6 load
rip) to enable RIP on the switch.
Loads RIPng into memory.
Displays RIPng status and general configuration parameters.
March 2011
ipv6 rip admin-state
page 11-71