Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 681

RIP Commands
Related Commands
ip interface
ip load rip
ip rip admin-state
ip rip interface
MIB Objects
rip2IfConfTable
rip2IfConfAddress
rip2IfConfStatus
OmniSwitch CLI Reference Guide
Creates a VLAN router interface.
Loads RIP into memory. When the switch is initially configured,
you must load RIP into memory before it can be enabled.
Enables/disables RIP routing on the switch.
Creates/deletes a RIP interface.
March 2011
ip rip interface admin-state
page 13-7