Ipsec Policy Rule - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

IPsec commands

ipsec policy rule

Adds, modifies, or removes an IPsec rule for a security policy.
ipsec policy name rule index [ah | esp]
no ipsec policy name
Syntax Definitions
name
index
ah
esp
Defaults
N/A.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
You can use the index parameter to specify the order in which the multiple rules for the same security
policy is applied to the original layload.
Examples
-> ipsec policy alucent rule 1 ah
-> no ipsec policy alucent
Release History
Release 7.1.1; command introduced.
Related Commands
ipsec policy
OmniSwitch CLI Reference Guide
The name of the security policy created by using the ipsec policy
command.
The index of this rule. Values may range from 1 to 10.
Specifies that the rule requires the presence of an Authentication Header
(AH).
Specifies that the rule requires the presence of an Encrypted Security
Payload header (ESP).
Adds, modifies, or removes a security policy.
March 2011
ipsec policy rule
page 12-9