Ipv6 Rip Route-Tag - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

ipv6 rip route-tag

ipv6 rip route-tag
Configures the route tag value for RIP routes generated by the switch.
ipv6 rip route-tag value
Syntax Definitions
value
Defaults
parameter
value
Platforms Supported
OmniSwitch 10K
Usage Guidelines
This value does not apply to routes learned from other routers. For these routes, the route tag propagates
with the route.
Examples
-> ipv6 rip route-tag 30
Release History
Release 7.1.1; command was introduced.
Related Commands
show ipv6 rip
MIB Objects
alaProtocolripng
alaRipngRouteTag
page 11-76
Route tag value. Valid range is 0 – 65535.
default
0
Displays RIPng status and general configuration information.
OmniSwitch CLI Reference Guide
IPv6 Commands
March 2011