Ipv6 Rip Invalid-Timer - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

ipv6 rip invalid-timer

ipv6 rip invalid-timer
Configures the amount of time a route remains active in RIB before being moved to the "Garbage" state.
ipv6 rip invalid-timer seconds
Syntax Definitions
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 10K
Usage Guidelines
This timer is reset each time a routing update is received.
Examples
-> ipv6 rip invalid-timer 300
Release History
Release 7.1.1; command was introduced.
Related Commands
ipv6 rip garbage-timer
ipv6 rip holddown-timer
MIB Objects
alaProtocolripng
alaRipngInvalidTimer
page 11-72
Time, in seconds, that a route will remain in an "Active" state. Valid
range is 1 - 300.
default
180
Configures the RIPng garbage timer value.
Configures the amount of time a route is placed in a holddown state.
OmniSwitch CLI Reference Guide
IPv6 Commands
March 2011