Ip Bfd Interface Transmit - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

ip bfd interface transmit

ip bfd interface transmit
Configures the transmit time interval for the BFD interface. This command specifies the minimum amount
of time BFD waits between each transmission of control packets from the interface.
ip bfd interface if_name transmit transmit_interval
Syntax Definitions
if_name
transmit_interval
Defaults
parameter
transmit_interval
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
The global transmit time interval serves as the default interval value for a BFD interface. The default
interval value is overridden when a specific value is configured for the interface.
•
Note that configuring the interface transmit time interval using the ip bfd interface transmit command
does not change the global value configured with the ip bfd transmit command.
Examples
-> ip bfd interface bfd-vlan-101 transmit 500
Release History
Release 7.1.1; command was introduced.
Related Commands
ip bfd interface
ip bfd transmit
show ip bfd interfaces
show ip bfd sessions
MIB Objects
alaBfdIntfTable
alaBfdIntfDesiredMinTxInterval
page 14-10
The name of an existing BFD interface.
The transmit time interval, in milliseconds. The valid range is 100–999.
default
300 milliseconds
Creates a BFD interface.
Configures a global BFD transmit time interval.
Displays the status and statistics of a BFD interface.
Displays the status and statistics of the BFD sessions.
OmniSwitch CLI Reference Guide
BFD Commands
March 2011