Ip Ospf Interface Bfd-State All-Neighbors - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

BFD Commands

ip ospf interface bfd-state all-neighbors

Establishes BFD sessions with all neighbors of the corresponding interface which are greater than or equal
to "2-way" state.
ip ospf interface if_name bfd-state all-neighbors {enable | disable }
Syntax Definitions
if_name
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
The specified OSPF interface must be enabled to interact with BFD.
•
The BFD status for OSPF must be enabled before OSPF can interact with BFD.
Examples
-> ip ospf interface int1 bfd-state all-neighbors enable
-> ip ospf interface int1 bfd-state all-neighbors disable
Release History
Release 7.1.1; command was introduced.
Related Commands
ip bfd interface admin-state
ip ospf bfd-state all-interfaces
ip ospf interface bfd-state
ip ospf interface bfd-state drs-
only
MIB Objects
alaOspfIfAugEntry
ospfIfIpAddress
alaOspfIfBfdDrsOnly
OmniSwitch CLI Reference Guide
The name of an existing OSPF interface.
Enables or disables the BFD status for OSPF protocol.
Enables or disables BFD for all OSPF interfaces configured.
Enables or disables BFD for a specific OSPF interface.
Establishes BFD sessions only on neighbors in full state.
March 2011
ip ospf interface bfd-state all-neighbors
page 14-19