Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 653

IPv6 Commands
-> show ipv6 rip routes detail 9900::/100
Destination
Mask length
Gateway(1)
Protocol
Out Interface
Metric
Status
State
Age
Tag
Gateway(2)
Protocol
Out Interface
Metric
Status
State
Age
Tag
output definitions
Destination
Gateway
State
Metric
Protocol
Mask Length
Out Interface
Status
Age
Tag
Release History
Release 7.1.1; command was introduced.
Related Commands
ipv6 rip interface
ipv6 rip interface metric
show ipv6 rip interface
OmniSwitch CLI Reference Guide
= 9900::,
= 100,
= fe80::2d0:95ff:fe12:e050,
= Local,
= nssa23,
= 1,
= Installed,
= Active,
= 10544s,
= 0,
= fe80::2d0:95ff:fe12:da40,
= Rip,
= bkbone20,
= 2,
= Not Installed,
= Active,
= 15s,
= 0,
IPv6 address/address length of the destination.
IPv6 gateway used to reach the destination.
Route status (Active/Inactive).
Routing metric for this route.
Protocol used to learn the route.
Prefix Length.
The interface used to reach the destination.
Route status (Active/Inactive).
The number of seconds since the route was last updated.
The route tag value for the route.
Creates/deletes a RIPng interface.
Configures the RIPng metric or cost for a specified interface.
Displays all or specified RIPng interface status.
March 2011
show ipv6 rip routes
page 11-93