BFD Commands
ip bgp bfd-state all-neighbors
Enables or disables BFD for all BGP neighbors.
ip bgp bfd-state all-neighbors {enable | disable}
Syntax Definitions
enable
disable
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
The BFD status for BGP must be enabled before BGP can interact with BFD.
Examples
-> ip bgp bfd-state all-neighbors enable
-> ip bgp bfd-state all-neighbors disable
Release History
Release 7.1.1; command was introduced.
Related Commands
ip bgp bfd-state
ip bgp neighbor bfd-state
MIB Objects
alaBgpGlobal
alaBgpBfdAllNeighbors
OmniSwitch CLI Reference Guide
Enables BFD for all the BGP neighbors.
Disables BFD for all the BGP neighbors.
Enables or disables BGP with BFD protocol.
Enables or disables the BFD for a specific BGP neighbor.
March 2011
ip bgp bfd-state all-neighbors
page 14-21