Vrrp Address - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

vrrp address

vrrp address
Configures an IP address for a virtual router.
vrrp vrid vlan_id address ipv4Addr
vrrp vrid vlan_id no address ipv4Addr
Syntax Definitions
vrid
vlan_id
ipv4Addr
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
A virtual router IP address must be configured before the virtual router can be enabled.
•
IP is an optional command parameter. It displays the same information as vrrp address.
Examples
-> vrrp 1 3 address 10.10.3.2
-> vrrp 1 3 no address 10.10.3.2
Release History
Release 7.1.1; command was introduced.
Related Commands
vrrp
show vrrp statistics
MIB Objects
alaVrrp3AssoIpAddrTable
alaVrrp3AssoIpAddrRowStatus
page 16-6
The virtual router ID, in the range from 1–255.
The VLAN on which the virtual router is configured.
The virtual IP address associated with the specified virtual router.
Configures a new VRRP virtual router or modifies an existing one. Used
to enable to disable a virtual router.
Displays statistics about VRRP packets for all virtual routers configured
on the switch or for a specific virtual router.
OmniSwitch CLI Reference Guide
VRRP Commands
March 2011