Ip Bfd Admin-State - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

BFD Commands

ip bfd admin-state

Enables or disables the global BFD protocol status for the switch.
ip bfd admin-state {enable | disable}
Syntax Definitions
enable
disable
Defaults
By default, BFD is disabled for the switch.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Disabling BFD does not remove the existing BFD configuration from the switch.
•
When BFD is disabled, all BFD functionality is disabled for the switch, but configuring BFD is still
allowed.
•
Configuring BFD global parameters is not allowed when BFD is enabled for the switch.
Examples
-> ip bfd admin-state enable
-> ip bfd admin-state disable
Release History
Release 7.1.1; command was introduced.
Related Commands
show ip bfd
MIB Objects
alaBfdGlobalAdminStatus
OmniSwitch CLI Reference Guide
Enables BFD.
Disables BFD.
Displays the BFD global status and general configuration parameters.
March 2011
ip bfd admin-state
page 14-3