Ip Ospf Interface Bfd-State - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

BFD Commands

ip ospf interface bfd-state

Enables or disables BFD for a specific OSPF interface.
ip ospf interface if_name bfd-state {enable | disable}
Syntax Definitions
if_name
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 10K
Usage Guidelines
The BFD status for OSPF must be enabled before OSPF can interact with BFD.
Examples
-> ip ospf interface int1 bfd-state enable
-> ip ospf interface int2 bfd-state disable
Release History
Release 7.1.1; command was introduced.
Related Commands
ip ospf bfd-state
ip ospf bfd-state all-interfaces
ip ospf interface bfd-state drs-
only
ip ospf interface bfd-state all-
neighbors
MIB Objects
alaOspfIfAugEntry
ospfIfIpAddress
alaOspfIfBfdStatus
OmniSwitch CLI Reference Guide
The name of an existing OSPF interface.
Enables the OSPF interface.
Disables the OSPF interface.
default
disable
Enables or disables the BFD status for the OSPF protocol.
Enables or disables BFD for all OSPF interfaces configured.
Establishes BFD sessions only on neighbors in full state.
Establishes BFD sessions with all neighbors of the corresponding
interface which are greater than or equal to "2-way" state.
March 2011
ip ospf interface bfd-state
page 14-17