vrrp priority
vrrp priority
Modifies the default priority value assigned to the virtual routers on the switch.
vrrp priority priority
Syntax Definitions
priority
Defaults
parameter
priority
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Modifying the default priority value will affect the value assigned by default to any new virtual routers
that are created.
•
To apply the new default value to the existing virtual routers, you must first disable the virtual routers,
then apply the new default value using the vrrp set command and enable the virtual routers again.
•
If any of the virtual routers are running with their own configured value or group value, then that value
will take priority over the new default value. To override the configured value with the new default
value, you must first disable the virtual routers, then override the configured value using the vrrp set
command with the override option and enable the virtual routers again.
Examples
-> vrrp priority 50
Release History
Release 7.1.1; command was introduced.
page 16-14
The default priority value for the virtual routers. The valid range is
1–255.
default
100
OmniSwitch CLI Reference Guide
VRRP Commands
March 2011