Show Ip Helper - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

show ip helper

show ip helper
Displays the current DHCP Relay and Relay Agent Information.
show ip helper
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Displays information for all IP addresses configured.
Examples
The following example shows the show ip helper command output:
-> show ip helper
Ip helper :
Forward Delay(seconds)
Max number of hops
Relay Agent Information
Relay Agent Information Policy = Keep,
PXE support
Forward option
Bootup Option
Bootup Packet Option
Forwarding address list (Standard mode):
128.100.16.1
output definitions
Forward Delay
Max number of hops
Relay Agent Information
Relay Agent Information Policy
page 15-26
= 300,
= 5,
= Enabled,
= Enabled,
= standard mode,
= Disable,
= DHCP
The current forward delay time (default is three seconds). Use the
ip helper forward-delay
The current maximum number of hops allowed (default is four
hops). Use the ip helper maximum-hops
value.
Indicates the status (Enabled or Disabled) of the DHCP relay
agent information option feature. Configured through the
agent-information command.
The policy configured to determine how the DHCP relay agent
handles the DHCP packets that already contain an Option-82 field.
OmniSwitch CLI Reference Guide
DHCP Relay Commands
command to change this value.
command to change this
ip helper
March 2011