ip bfd interface
ip bfd interface
Configures a BFD interface.
ip bfd interface if_name
no ip bfd interface if_name
Syntax Definitions
if_name
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of this command to delete a BFD interface.
•
The interface name must be an existing IP interface name that is configured with an IP address.
Examples
-> ip bfd interface bfd-vlan-101
-> no ip bfd interface bfd-vlan-101
Release History
Release 7.1.1; command was introduced.
Related Commands
ip bfd interface admin-state
show ip bfd interfaces
show ip bfd sessions
MIB Objects
alaBfdIntfTable
alaBfdIntfAddrType
alaBfdIntfAddr
alaBfdIntfIndex
page 14-8
The name of an existing IP interface.
Configures the administrative status of a BFD interface.
Displays the status and statistics of a BFD interface.
Displays the status and statistics of the BFD sessions.
OmniSwitch CLI Reference Guide
BFD Commands
March 2011