RIP Commands
ip rip route-tag
Configures the route tag value for RIP routes generated by the switch.
ip rip route-tag value
Syntax Definitions
value
Defaults
parameter
value
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Only RIPv2 supports route tags.
Examples
-> ip rip route-tag 0
Release History
Release 7.1.1; command was introduced.
Related Commands
show ip rip
MIB Objects
alaRipRedistRouteTag
OmniSwitch CLI Reference Guide
Route tag value. Valid range is 0–2147483647.
default
0
Displays the RIP status and general configuration parameters (e.g.,
forced hold-down timer).
March 2011
ip rip route-tag
page 13-19