Ip Vrrp Ip; Ip Vrrp Mode - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Default
Mode
Command
History
Related
Commands

ip vrrp ip

Syntax
Default
Mode
Command
History
Related
Commands

ip vrrp mode

| Routing Commands
416
The no ip vrrp vrID authentication command sets the default authorization details value for the
virtual router configured on a specified interface.
no authorization
Interface Config; Interface VLAN; Interface Range, which is indicated by the
(conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#.
Version 2.3 Added Interface Range and Interface VLAN modes.
interface range Defines an interface range and accesses the Interface Range mode
interface vlan Creates a new VLAN and assigns it an ID, and then enters the Interface VLAN
mode, which provides access to VLAN configuration commands for the specified
VLAN.
ip vrrp <vrID> Sets the VRID (virtual router ID) on an interface for virtual router configuration in
the router. This command also has options.
This command sets the IP address value for a virtual router.
ip vrrp vrID ip
addr [secondary]
The parameter vrID is the virtual router ID which has an integer value range from 1 to 255.
The value for addr is the IP address to be configured on that interface for VRRP.
(OPTIONAL) The keyword secondary designates that the IP address is a secondary address on this
interface.
none
Interface Config; Interface VLAN; Interface Range, which is indicated by the
(conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#.
Version 2.3 Added Interface Range and Interface VLAN modes.
interface range Defines an interface range and accesses the Interface Range mode
interface vlan Creates a new VLAN and assigns it an ID, and then enters the Interface VLAN
mode, which provides access to VLAN configuration commands for the specified
VLAN.
ip vrrp <vrID> Sets the VRID (virtual router ID) on an interface for virtual router configuration in
the router. This command also has options.
This command enables the virtual router configured on the specified interface. Enabling the status field
starts a virtual router.